AISI 316L 304 SMS Stainless Steel Food Grade Manual Tri Clamp Staight Diaphragm Valve

• Customization: Available
• Media: Gas
• Temperature: Low Temperature
• Model NO.: triclamp diaphragm valve
• Actuator: Manual
• Connection: Clamp Diaphragm Valve
• Material: Stainless Steel
• Structure: Roof Type Diaphragm Valve
• Pressure: Low Pressure
• Flow Direction: Reversing
• Function: Solenoid Valve, Electronic Type, Intelligent Type, Field Bus
• Usage: Safety, Emptying, Drain, Temperature Control, Flow Control
• Standard: DIN, GB, ANSI, BSW, JIS
• Transport Package: Wooden Case
• Specification: 100.00cm * 50.00cm * 100.00cm
• Trademark: Xing Sheng
• Origin: Wenzhou, China
• HS Code: 8481804090
• Production Capacity: 100000
• Model NO.: XS-VALVE-0023
• Media: Gas, Oil, Water, Acid
• Standard: Standard
• Connection Mode: Clamps
• Power: Pneumatic
• Material: Stainless Steel
• Type: Self-Operated
• Standard or Nonstandard: SMS, DIN, 3A, Bpe
• Flow Medium Parts: SS316L
• Size: 1/4inch to 4inch ,DN6 to DN100
• Connection: Butt-Weld,Tri-Clamp,Male Thread,Female-Male Thread
• Body Combination: Straight Model, T Three Ways,U Type, Tank Bottom
• Seal Material: Silicone, EPDM,EPDM with PTFE Split Diaphragm
• Power Options: Manual , Pneumatic
• Control Options: C-Top Controller, C-Top Controller (as-I)
• Temperature of Media: Low Temperature, Medium Temperature, Normal Temper
• Pressure: <=10bar(145psi)
• Supply Pressure for Air Actuator: 5~8(72.52psi~116psi)
• External Surface Treatment: Ra16~32uin(0.4~0.8um)
• Internal Surface Treatment: Ra16~32uin(0.4~0.8um)
• Application: Food, Beer, Beverage, Pharmaceutical
• Certificate: ISO, CE
• Transport Package: Strongly Seaworthy Plywooden Cases
• Specification: 1/4inch to 4inch, DN6 to DN100
• Trademark: Xing Sheng
• Origin: Wenzhou, China
• HS Code: 8481804090
• Production Capacity: 1000sets/Month

Product Description

 

Basic Info.

Model NO.

XS-VALVE-0023

Media

Gas, Oil, Water, Acid

Standard

Standard

Connection Mode

Clamps

Power

Pneumatic

Material

Stainless Steel

Type

Self-Operated

Standard or Nonstandard

SMS, DIN, 3A, Bpe

Flow Medium Parts

SS316L

Size

1/4inch to 4inch ,DN6 to DN100

Connection

Butt-Weld,Tri-Clamp,Male Thread,Female-Male Thread

Body Combination

Straight Model, T Three Ways,U Type, Tank Bottom

Seal Material

Silicone, EPDM,EPDM with PTFE Split Diaphragm

Power Options

Manual , Pneumatic

Control Options

C-Top Controller, C-Top Controller (as-I)

Temperature of Media

Low Temperature, Medium Temperature, Normal Temper

Pressure

<=10bar(145psi)

Supply Pressure for Air Actuator

5~8(72.52psi~116psi)

External Surface Treatment

Ra16~32uin(0.4~0.8um)

Internal Surface Treatment

Ra16~32uin(0.4~0.8um)

Application

Food, Beer, Beverage, Pharmaceutical

Certificate

ISO, CE

Transport Package

Strongly Seaworthy Plywooden Cases

Specification

1/4inch to 4inch, DN6 to DN100

Trademark

Xing Sheng

Origin

Wenzhou, China

HS Code

8481804090

Production Capacity

1000sets/Month

Product Description

DN15 AISI 316L SMS Stainless Steel Food Grade Manual Tri Clamp Staight Diaphragm Valve

The diaphragm valve is normally closed, where the diaphragm clings to the inner cavity of the valve body and closes the pipeline flow path. When the diaphragm valve needs to be cleaned or opened, the stem moves upward by rotating the handwheel manually or driving the pneumatic control actuator, and the spherical diaphragm bends upward, so that the valve is open and reach the requirement of clean and open. The diaphragm separates the inner cavity of the lower valve body from the inner cavity of the upper valve cover, so that the stem and valve core located in the upper part of the diaphragm are not corroded by the medium, thus the packing sealing structure is eliminated and the medium leakage will not occur. Optimized valve body design made the cleaning liquid discharge fully, do not form a retention phenomenon.

 

Working Principle

The diaphragm valve is normally closed, where the diaphragm clings to the inner cavity of the valve body and closes the pipeline flow path. When the diaphragm valve needs to be cleaned or opened, the stem moves upward by rotating the handwheel manually or driving the pneumatic control actuator, and the spherical diaphragm bends upward, so that the valve is open and reach the requirement of clean and open. The diaphragm separates the inner cavity of the lower valve body from the inner cavity of the upper valve cover, so that the stem and valve core located in the upper part of the diaphragm are not corroded by the medium, thus the packing sealing structure is eliminated and the medium leakage will not occur. Optimized valve body design made the cleaning liquid discharge fully, do not form a retention phenomenon

Main Parameter 

Standard		SMS, DIN, 3A, BPE
Material Contact Parts		SS316L (1.4404)	Provided with material inspection report
Size		1/4"to 4", DN6 to DN100
Body Combination		Straight Model, T Three Ways,U Type, Tank Bottom
Connection		Butt-weld,Tri-clamp,Male Thread,Female-Male Threaded,Union,Weld-Thread,Flange
Seal Material		Silicone, EPDM,EPDM with PTFE Split Diaphragm,EPDM with PTFE Composite Diaphragm. All seals material comply with FDA21CFR117.2600
Power Option		Manual Operation
		SS Pneumatic Actuator, Plastic Pneumatic Actuator
		C-top Controller, C-top Controller (AS-I)
Working Pressure		≤10bar(145psi)
Supply Pressure for Air Actuator		5~8(72.52psi~116psi)
External Surface Treatment		Ra16~32uin (0.4~0.8um)
Internal Surface Treatment		Ra16~32uin (0.4~0.8um)

Design & Features

1.Sanitary diaphragm valve are better in feature of flow in comparison with other valves. It is easier to clean up and better to process the substance with particles. the phenomenon of air pocket is rare during application of flow control.
2.Mini diaphragm valve available size:1/4",3/8",1/2",3/4",DN6,DN10,DN15,DN20
3.Diaphragm valve availbale size: 1"-4",DN25-DN100
4.Suitable for CIP/SIP.
5.Parts in contact with the product: SS316L,Other stainless steel parts:SS304.

Options
1.The gasket can be EPDM,EPDM with PTFE Split Diaphragm,EPDM with PTFE Composite Diaphragm 2.Connection can be Butt-weld,Tri-clamp,Male Thread,Female-Male Threaded,Union,Weld-Thread,Flange   or others upon request. 3.Power Option has Manual Operation,SS Pneumatic Actuator, Plastic Pneumatic Actuator,C-top Controller, 

C- top Controller (AS-I) 4.Body Combination has Straight Model, T Three Ways,U Type, Tank Bottom
 

Technical Specifications

Max. pressure: 10bar
Min. pressure: 0.2bar
Temperature range: EPDM: -5 ~ 212°F(-20 ~ 100ºC)
EPDM with PTFE:-184~ 302°F(-120 ~ 150ºC)
Other materials are Available upon request.